Waterjet Cyclone
Abrasive Removal System

The Waterjet Cyclone abrasive removal system removes up to 10 lbs of garnet per minute!

• Waterjet Cyclone Abrasive Removal System Specifications (.pdf)

Adobe Acrobat is required. Click the link below to download a free copy of Acrobat Reader for PC or Mac.

Waterjet Cyclone Abrasive Removal System

Specifications

• 1 yard hopper and 1 yard abrasive bags.
• Standard outlet electrical supply.
• Shop air supply, 80-90 psi, 14 cfm at 85 psi.
• 60 gpm maximum water flow rate.
• Only 25 sq. ft. required floor space.
• Removes up to 10 lbs of abrasive per minute.
• Gravity-return overflow from the abrasive holding tank.

Advantages

• Cleaner and easier than shoveling out your tank.
• Operates unattended.
• Full abrasive bags are removed and handled by a forklift.
• Less expensive than pumping or shoveling out your tank.
• No machine down-time required to remove abrasive.
• Can be custom sized for use on any waterjet tank.
• Very low maintenance costs.
• Two accessible check valves are the only moving parts that come into contact with the abrasive slurry.
• Easy to set up and operate.

Options

• Use attachments to remove abrasives from a waterjet tank that is already full.
• Install an agitation and suction plumbing system in an empty catch tank to keep it clean and keep up with abrasive use.